Reducing Ring Spacers

BASE PART NUMBER: As shown here,

the BASE PART NUMBER defines the Series (three characters), the material (one character), the nominal size, the thickness TH and the reduced center hole pipe size RR. Use a decimal number to indicate the nominal size. For thicknesses up to 6", replace the TH with the decimal thickness. Then, replace RR in the part number with the reduction pipe size in decimals. For thickness over 6”, contact factory. Note that the Class (or lb.) designation does not imply a pressure rating. For example, a 3/4” x 1” thick x 1/2” Class 150 PTFE Reducing Ring Spacer thick would be SRRT-0.75-1-0.5

Options

NPT THREADING: For NPT threaded spacers, add to the BASE PART NUMBER the suffix NPT.

For example, a 2” x 1-1/2” thick x 3/4” Class 150 PTFE threaded Reducing Ring Spacer
would be SRRT-2-1.5-0.75-NPT

Click here to view the minimum thicknesses required for NPT threads.

CLASS 300 (300 lb.) SPACERS: For Class 300 spacers, add to the BASE PART NUMBER the suffix 300. For other classes, contact the factory. For example, a 2” x 1-1/2” thick x 1” Class 300 PTFE threaded Reducing Ring Spacer would be SRRT-2-1.5-1-NPT-300

Click here to view the Sizes of Class 150 and 300 Spacers and Flanges.

Links to Product Literature such as Installation Instructions can be found below the following table.